EN 17
· Android Mirroring
3. Go to Settings on E-share App, Select "Write NFC Tags" and follow the prompts to activate
the NFC area on the projector.
4. Now you can tap your phone closely on the NFC area to Screencast while the projector is
powered on and on the same Wi-Fi network as your phone.
Note:
1. NFC screencast requires your phone to touch the NFC detection area on the projector, which
may not be suitable for ceiling mounts.
2. NFC reading areas and the range of your smartphone vary from brand and model. Please
refer to your smartphone manufacturer for detailed instructions.
3. Currently the NFC tag does not support cross-OS use. An activated tag can only be read by
casting devices with the same operating system as the setting device.
Go to home page -- Select the [ Settings ] -- [ Bluetooth ] -- Scan the Bluetooth devices
nearby automatically -- Choose the Bluetooth device desired -- it will be paired and
connected automatically.
NFC
E-share
6. Bluetooth Setting
To Next Page
Loading...
Need help?
General
