09
STARTING PROJECTOR
1)Press the power button on the remote control until the red light goes off;
2)Adjust the focus ring on the left side of the projector to get the best image
performance; (If it is still blurry, please try to adjust the projection distance.)
3)Use the vertical/horizontal Trapezoid of the projector to get a rectangle projec-
tion screen;
4)Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player,
Computer, etc.) in the corresponding interfaces of the projector, please be sure to
select the corresponding source. If you do not select the correct source, the
projector will not be able to detect the signal.
5)Select the [Setting] icon，enter the [General setting] menu, and then you can
select the option [Language setting]to set the preferred language of your main
system.
IMAGE ADJUSTMENT
When using the projector for the first time, it normally displays an unclear
image. This is due to the lens being out of focus or the incorrect trapezoid
setting.
Please follow the below steps to correct:
1.Focus Adjustment
Focus Ring
Support@yabertech.com
EN
To Next Page
Loading...
Need help?
General
