Need help?Do you have a question about the Yaesu DR-1X and is the answer not in the manual?
General| Channel Capacity | 1000 channels |
|---|---|
| Duplexer | Built-in |
| Frequency Range | 144-148 MHz / 430-450 MHz |
| Operating Modes | FM, C4FM |
| Power Supply | 13.8 V DC |
| Control Interface | Ethernet |
Critical safety instructions and warnings to prevent injury, death, or equipment damage during operation.
Identifies and describes the function of each component on the front panel of the repeater.
Identifies and describes the function of each component on the rear panel of the repeater.
Explains the elements and indicators of the repeater's operation mode display.
Details the interface and functions available within the repeater's setup mode screen.
Crucial precautions for safe and effective repeater installation.
Explains the importance and methods of grounding for electrical safety and performance.
Step-by-step guide for connecting antennas to the repeater, with or without a duplexer.
Instructions for connecting the main AC power and backup DC power for the DR-1X.
Instructions for connecting the DC power supply for the DR-1XE model.
Details connecting the repeater to an external controller via the CONTROL I/O connector.
Discusses antenna considerations for optimal repeater transmission and reception.
Covers powering the unit on/off and setting the repeater's call sign.
Covers display control, volume adjustment, and setting the repeater frequency.
Explains how to switch between automatic (AUTO) and fixed (FIX) operating modes.
Explains AMS function, communication modes, and adjusting squelch levels.
Lists pin assignments and signals for controlling the repeater from an external device.
Troubleshooting guide for common issues encountered with the repeater.
To Next Page
