Yaesu DR-2X User Manual

VHF/UHF C4FM/FM
50W AMS DIGITAL REPEATER
Operating Manual

Yaesu DR-2X Specifications

General

Brand	Yaesu
Model	DR-2X
Category	Repeater
Language	English

Summary

Introduction

Safety Precautions

Crucial safety warnings and precautions for installation and operation to prevent hazards.

Setting up the Repeater

Safety Measures for Installation

Essential safety advice for installing the repeater to prevent damage and ensure proper operation.

Installing the Repeater

Instructions for physically mounting the repeater unit on a rack or desk.

About Electrical Grounding

Explanation of the importance of an effective ground system for safety and performance.

Connecting the Power Supply

Main Power and Backup Power

Procedures for connecting main AC power and optional backup DC power.

Initial Set Up

Setting the ID (Call Sign)

Procedure for entering the repeater's unique call sign or ID for the first time.

Set Up Operation Mode

Set Up Frequency

Dual Receive Frequency Configuration

Configuration of separate uplink and downlink frequencies for dual receive capability.

Set Up Priority Channel

Priority Channel Functionality

Set Up Other Functions

Set Up DG-ID Number

DG-ID, Default ID, and TOT Settings

Configuration of DG-ID, Default ID, and Time Out Timer for group access.

Registering DG-ID Groups

Set Up DP-ID

DP-ID Functionality and Registration

Advanced Set Up Example

IMRS Network Setup

Setup and operation of an IMRS network connecting multiple repeaters via the internet.

Remote Controls

Remote Control Configuration

Configuring the repeater for remote control operations via C4FM digital or Analog FM.

Digital and DTMF Control Commands

Changing Remote Command Codes

Actual Remote Control Procedure

C4FM Digital and Analog FM Remote Control

Voice Messages

C4FM Digital and Analog FM Voice Messaging

Set Up Various Functions

Password Setting

Restoring Default Settings (Factory Reset)

Connect to HRI-200 Node Station

HRI-200 Connection and Mode Switching

Guide on connecting the HRI-200 and switching repeater modes.

Remote Operation with External Controller

Enabling Remote Operation and Controller Connection

Procedures for turning remote operation on/off and connecting an external controller.

Connect Repeater Controller S-COM7330

S-COM7330 Modification and Settings

Specifications

After-market Services