Need help?Do you have a question about the Yaesu FTR-2410A and is the answer not in the manual?
Details RF output power, frequency stability, modulation, and audio response.
Details sensitivity, frequency stability, and adjacent channel selectivity.
Details frequency range, separation, insertion loss, and VSWR for the duplexer.
Lists items like power cords, fuses, and small plugs included with the unit.
Lists optional units like tone burst units, DTMF units, and power amplifiers.
Describes the function of each control and indicator on the front panel.
Details the function and purpose of each connector and terminal on the rear panel.
Discusses antenna mounting, frequency separation, and cable length for optimal performance.
Explains how to select the correct AC power supply for the repeater.
Explains the function and setting of the time-out timer for transmissions.
Explains how to use the DTMF control decoder for repeater functions.
Provides step-by-step instructions for installing the tone squelch unit.
Details the installation procedure for the DTMF Decoder Unit.
Provides instructions for installing the CW ID Unit.
Guides the user through the installation of an external duplexer.
Describes the functionality of the receiver unit.
Details the operation of the transmitter unit.
Step-by-step alignment procedures for the receiver section.
Step-by-step alignment procedures for the transmitter section.
Provides instructions for aligning the cavity duplexer.
Shows component placement for the FTR-710A RX unit.
Shows component placement for the FTR-2410A TX unit.
Shows component placement for the FTR-5410 TX unit.
Provides the schematic diagram for the FTR-710A RX unit.
Provides the schematic diagram for the FTR-2410A TX unit.
Provides the schematic diagram for the FTR-5410 RX unit.
Provides the schematic diagram for the COR unit.
Overall connection diagram for the repeater unit.
Lists components for the main chassis.
Lists parts for the FTR-710A receiver unit.
Lists components for the FTR-2410A transmitter unit.
Lists components for the FTR-5410 transmitter unit.
Details specifications for the FL-750 amplifier.
Details the alignment steps for the FL-750 amplifier.
Details specifications for the FL-2450 amplifier.
Details the alignment steps for the FL-2450 amplifier.
Details specifications for the FL-5450 amplifier.
Details the alignment steps for the FL-5450 amplifier.
Details specifications for the FP-15 AC Power Supply.
Describes the DC backup battery connection and charging.
To Next Page
General
