Need help?Do you have a question about the Yaesu WIRES-X HRI-200 and is the answer not in the manual?
General| Category | Repeater Interface |
|---|---|
| Network Interface | Ethernet |
| Compatibility | Yaesu Transceivers |
| Connection | USB |
| Operating Temperature | -10°C to +50°C |
Explains the WIRES-X system and its purpose in amateur radio communication.
Details the components and operational flow of the WIRES-X system.
General information and terms of use for the WIRES-X software and hardware.
Important safety instructions to prevent injury and damage during use.
Lists all items included in the WIRES-X Connection Kit package.
Lists optional accessory cables available for the WIRES-X Connection Kit.
Explains manual conventions and notes on content accuracy.
Details the process of registering for a WIRES-X ID and obtaining necessary credentials.
Explains how to connect the HRI-200 interface box and its components.
Illustrates the physical connection of the HRI-200 to a PC via USB.
Guides on connecting the HRI-200 to C4FM digital and FM analog transceivers.
Step-by-step instructions for installing the WIRES-X software and drivers.
Steps for configuring PC and router settings for internet access and port forwarding.
Recommendations for securing the internet connection against unauthorized access.
Instructions on launching the WIRES-X application and initial security setup.
Setting up node information, operating modes, and transceiver parameters.
Instructions on establishing connections to other nodes and rooms via the Internet.
Explores features like preset search, room management, GM function, and remote control.
How to control the software from another PC using the remote monitor function.
Procedures for adjusting audio input/output levels for analog operations.
How to use the news function for sharing text, images, and audio data.
Displaying and transmitting QSL card images for nodes and rooms.
Overview of the WIRES-X software's main interface and its components.
Displays lists of active groups, nodes, rooms, and status indicators.
Accesses various functions through menus like File, View, Connect, Tool, and Help.
Compares WIRES-X features with WiRES-II and lists communication ports.
Lists and explains DTMF commands used with WIRES-X software.
Technical specifications for the HRI-200 interface box.
Declaration of conformity and FCC compliance information.
To Next Page
