Specifications
General
Frequency Ranges: RX 136 - 174 MHz
400 - 480 MHz
TX 136 - 174 MHz (Asian version)
144 - 146 MHz (European version)
144 - 148 MHz (USA version)
400 - 480 MHz (Asian version)
430 - 440 MHz (European version)
430 - 450 MHz (USA version)
FM Broadcast 65-108 MHz
Channel Steps: 5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 kHz
Frequency Stability: ±5 ppm (–10 °C to +60 °C, +14 °F to +140 °F )
Repeater Shift:
±600 kHz (144 MHz)
±1.6 / 5.0 / 7.6 MHz (430 MHz)
Emission Type: F2D, F3E
Antenna Impedance: 50 Ohms
Supply Voltage: Nominal: 7.4V DC, Negative Ground
Current Consumption: 205 mA (Receive) 200 mW Output
(Approx. @7.4V) 100 mA (Standby, Saver Off)
18 mA (Standby, Saver On)
4 mA (Auto Power Off)
1.5 A (5 W Tx , 144 MHz) 7.4 V DC
1.7 A (5 W Tx , 430 MHz) 7.4 V DC
Operating Temperature: – 4 °F to +140 °F (– 20 °C to + 60 °C)
Case Size:
2.1” (W) x 4.1” (H) x 1.2” (D) (52.5 x 104.5 x 31 mm)
(W/O knob and antenna)
Weight: 9.17 oz (260 g) with SBR-25LI and antenna
Transmitter
RF Power Output: 5.0 W (High) / 2.5 W (Middle) / 0.5 W (Low)
(@ 7.4 V with SBR-25LI)
Modulation Type: Variable Reactance F2D, F3E
Maximum Deviation: ±5.0 kHz (F2D, F3E)
Spurious Emission: At least 60 dB down (@ High and Middle power)
At least 40 dB down (@ Low power)
Microphone Impedance: 2 kOhms
45FT-65R/FT-65E Operating Manual
To Next Page
