To Next PageTo Next Page
Need help?Do you have a question about the Yakima DoubleHaul and is the answer not in the manual?
General| Mounting | Roof Rack |
|---|---|
| Capacity | 2 rods |
| Security | SKS locks included |
| Compatibility | Most vehicles with roof racks |
| Locking Mechanism | SKS (Same Key System) locks |
Connects the front and rear halves of the product using couplers and specific wrenches.
Adjusts thumbscrews on mounting plates to allow free sliding for positioning.
Position the product on the vehicle's crossbars, ensuring proper centering and support.
Secure the product to crossbars using clamps, knobs, and thumbscrews, torquing to specified values.
Verify the product is securely mounted by pushing and pulling it in all directions.
Secure the installed carrier to the crossbars using the lock plate and accessory lock.
Insert fishing rods into compartments, guides up/sideways, reels supported for secure transport.
Use included felt pads for extra reel protection against internal walls.
Detach accessory locks and lock plates from the carrier and crossbars.
Unscrew knobs and remove the clamping hardware from the crossbars.
Safely remove the entire Double Haul unit from the vehicle's crossbars.
Detach the front end cowl using specified wrenches for reconfiguration.
Reattach the removed end cowl to the rear of the product for half-size setup.
Detach thumbscrews and mounting plates from the front portion for adjustment.
Position and loosely attach the mounting plates to the rear portion for the half-size configuration.
Re-engage with the main installation process after reconfiguring the unit.
Emphasizes secure mounting and adherence to instructions to prevent accidents.
Details rules for distributing load, center of gravity, and avoiding exceeding limits.
Advises on speed limits, handling, and conditions affecting vehicle performance with loads.
Instructions for cleaning, periodic inspection, replacement parts, and warranty implications.
