13
Using the System
5
Changing your Key Pad PIN
The default Key Pad PIN is 1234. You can set up to 10 sets
of 4 digit PIN numbers in the app:
Arming and Disarming your Alarm
Using the Yale Home App
Setting up Part Armed Home Mode
Part Armed mode is usually used to protect the ground
oor when you are upstairs in bed.
Note! The PIR Motion Detector and PIR Image
Camera have a built in battery save mode. After
detecting motion, they will wait for one minute
without motion before sending any further signals
to the Smart Hub. This saves battery power.
In your device list, go in to the settings for each device
and select the required setting.
Swipe down to
part arm
Swipe down to
fully arm
Swipe
Burglar
Home Omit
Entry
Home Access
Disarmed Part-Armed Armed
Key
To Next Page
Loading...
Need help?
General
