Table 4. Operator Controls (See Figure 8) (Continued)
Item
No.
Item Function
9
(Cont)
Tilt Control Lever These trucks can be equipped with the Return to Set Tilt (RTST) option if truck
has electronic
hydraulic mini-levers. The RTST option automatically stops the tilt
function at a set point. To override the RTST option, press the override button
located directly behind the tilt mini-lever and push the tilt mini-lever forward or pull
backward.
RTST is intended as an operator aid in positioning forks or attachments for their
application to minimize product damage and facilitate load handling. Care should
be taken to operate the truck in accordance with load handling instructions as
described in Operating Techniques in the Operating Procedures section of this
Operating Manual.
Model Description
47
To Next Page
Loading...
