Model Description
General
This Operating Manual is for the following models of lift
trucks:
GC/GLC040VX, GC/GLC050VX, GC/GLC055SVX, GC/
GLC060VX, GC/GLC070VX (C910)
Lift trucks available with the following engines:
• PSI 2.4L engine which uses gasoline and LPG fuel
• Kubota 2.5L engine which uses LPG fuel
GP/GLP/GDP040-070VX (D875)
Lift trucks available with the following engines:
• PSI 2.4L engine which uses gasoline and LPG fuel
• Kubota 2.5L engine which uses LPG fuel
• Yanmar 2.6L engine which uses diesel fuel
• Yanmar 3.3L engine which uses diesel fuel
• Kubota 2.4L engine which uses diesel fuel
Lift trucks in this manual will be equipped with a Standard or
Techtronix 100 transmission These lift trucks can be equip-
ped with three types of controls:
• A Foot Directional Control (FDC) pedal that controls both
the forward and reverse operation of the transmission and
the speed of the engine.
• A Direction Control Lever on the left side of the Display
Switch Cluster that controls the forward, neutral, and
reverse operation of the transmission. A separate accel-
erator pedal controls the engine speed.
• A directional control switch integrated into the armrest on
units equipped with E-hydraulics controls both forward
and reverse operation of the transmission. A separate
accelerator pedal controls engine speed.
The GC/GLC040VX, GC/GLC050VX, GC/GLC055SVX, GC/
GLC060VX, GC/GLC070VX lift trucks are equipped with
solid rubber tires. The GP040-070VX, GLP40-70VX, and
GDP40-70VXGP/GLP/GDP040-070VX are equipped with
pneumatic tires or solid pneumatic tires. See Wheels and
Tires in the Maintenance Section for a description of these
tires.
Model Description
12
To Next Page
Loading...
Need help?
General
