Legend for Figure 12
A. STANDARD, NON-SWIVEL SEAT B. FULL SUSPENSION SWIVEL SEAT
1. SEAT BELT
2. WEIGHT ADJUSTMENT KNOB
3. RIDE POSITION INDICATOR
4. FORWARD/BACKWARD ADJUSTMENT LEVER
5. BACKREST ANGLE ADJUSTMENT LEVER
6. ARMREST
7. SWIVEL LATCH RELEASE LEVER
5. Do not drive a lift truck into an elevator unless authorized
to do so. Approach the elevator slowly. After the elevator is
properly leveled, the lift truck must be centered so that the
elevator is balanced.
When the lift truck is in the proper position in the elevator, set
the brakes, put the controls in NEUTRAL and shut off the
power. It is advisable that all other personnel leave the ele-
vator before the lift truck enters or leaves.
6. Drive carefully, observe traffic rules, and be in full
control of the lift truck at all times. Be completely
familiar with all the driving and load handling techni-
ques contained in this Operating Manual.
Driving and Direction Changes
KNOW YOUR TRANSMISSION OPTION.
Lift trucks covered in this manuals will be equipped with a
Standard or Techtronix 100 transmission.
Read the following section carefully. See Table 5 and Fig-
ure 13 for the features and operation differences in these
transmission types.
Operating Procedures
80
To Next Page
Loading...
Need help?
General
