86 Chapter 7—Input Channels
02R96 Version 2—Owner’s Manual
2 Use the cursor buttons to select the surround mode buttons, and press
[ENTER] to activate the selected mode.
The diagram on each page shows the typical sound image placement and the Surround
channel to Bus Out configuration.
Select the SURR/BUS SETUP button, then press the [ENTER] button to display the Sur-
round Bus Setup page, which enables you to change the Surround Channel to Bus Out
assignment. See “Assigning Surround Channels to Buses” on page 87 for more information
on the Surround Bus Setup page.
3-1 Surround 5.1 Surround
6.1 Surround
To Next Page
Loading...
