Yamaha 2009 YZF-R1 (Y) - Standard Key Code Voiding Method; Voiding the Standard Key Code

IMMOBILIZER SYSTEM
8-112
Standard key registration
Voiding the standard key code:
If a standard key has been lost, it is possible to disable its use by re-registering the remaining stan-
dard key. Standard key registration erases the stored standard key code from the memory, thus dis-
abling the lost standard key. To re-register, refer to “Standard key registration”.
Standard key code voiding method
a. Main switch “ON”
b. Main switch “OFF”
c. LED on
d. LED off
e. Less than 5.0 s
f. Code re-registering key
g. First standard key
h. Second standard key
i. Registration mode
A. Registration of the second standard key is
complete.
B. Immobilizer system indicator light stops
flashing when the registration of the second
standard key is complete.
a. Main switch “ON”
b. Main switch “OFF”
c. LED on
d. LED off
e. Less than 5.0 s
f. Code re-registering key
g. Remaining standard key
h. Registration mode
A. If the immobilizer system indicator light
stops flashing 5 seconds after the first stan-
dard key is registered, the second standard
key cannot be registered.