EasyManua.ls Logo

Yamaha 3FA-AE2 - Page 31

Yamaha 3FA-AE2
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 23 –
CHK
ADJ
REPLACING A HEADLIGHT BULB
3. Remove:
bulb holder 1
bulb
NOTE:
_
Push the headlight bulb holder inward, turn it
counterclockwise and remove the defective
bulb.
WARNING
_
Keep flammable products and your hands
away from the bulb while it is on, since it
will be hot. Do not touch the bulb until it
cools down.
4. Install:
bulb
CAUTION:
_
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
1
New

Related product manuals