Yamaha 40VMHO - Tilt Support Lever for Power Trim and Tilt or Hydro Tilt Model; Tilt Support Lever for Manual Tilt Model; Top Cowling Lock Lever(S) (Turn Type)

Basic components
16
To lock it, set the tilt lock lever in the “”
(lock) position. To release, push the tilt lock
lever in the “” (release) position.
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU30200
Tilt support lever for manual tilt
model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU26372
Top cowling lock lever(s) (turn type)
To remove the engine top cowling, turn the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling again by returning the lever(s) to the
lock position.
1. Tilt lock lever
ZMU03099
1
ZMU03194
1. Top cowling lock lever(s)
1. Top cowling lock lever(s)
ZMU03358
ZMU03827
1
ZMU02596
1