Need help?Do you have a question about the Yamaha A-1000 and is the answer not in the manual?
General| Channel Separation | 70dB (1kHz) |
|---|---|
| Signal to Noise Ratio | 110dB |
| Input Sensitivity | 150mV (line) |
| Speaker Load Impedance | 4 ohms to 16 ohms |
| Type | Integrated Amplifier |
Provides essential tips for making connections, including cord placement and ventilation.
Details speaker impedance matching, connection procedure, and cord handling.
Explains connecting MM/MC cartridges, ground wire, and selecting cartridge load impedance.
Details the main power switch operation and the speaker system selection switch (A, B, or both).
Guide for selecting correct phono input and matching cartridge load impedance for optimal performance.
Provides a table of common faults, their causes, and recommended corrective actions.
Details power output, distortion, sensitivity, frequency response, and other technical parameters.
To Next Page
