Need help?Do you have a question about the Yamaha A-460 and is the answer not in the manual?
Steps for safely removing the top cover of the amplifier unit.
Steps for safely removing the bottom cover of the amplifier unit.
Procedure for detaching and removing the front panel assembly.
Detailed steps for replacing power transistors, including mica base.
Instructions for removing the main circuit board from the unit.
Procedure for adjusting the amplifier's idling current for optimal performance.
Visual breakdown of the amplifier's front components for identification.
Visual breakdown of the amplifier's rear components for identification.
Detailed listing of components specifically on the circuit board.
Steps for safely removing the top cover of the amplifier unit.
Steps for safely removing the bottom cover of the amplifier unit.
Procedure for detaching and removing the front panel assembly.
Detailed steps for replacing power transistors, including mica base.
Instructions for removing the main circuit board from the unit.
Procedure for adjusting the amplifier's idling current for optimal performance.
Visual breakdown of the amplifier's front components for identification.
Visual breakdown of the amplifier's rear components for identification.
Detailed listing of components specifically on the circuit board.
General| Power Output | 60 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Input Sensitivity | 2.5mV (MM), 150mV (Line) |
| Signal-to-Noise Ratio | 86dB (MM), 100dB (line) |
| Dimensions | 435 x 112 x 388mm |
| Weight | 8.2kg |
| Total harmonic distortion | 0.015% |
To Next Page
