Need help?Do you have a question about the Yamaha A-520 and is the answer not in the manual?
General| Weight | 9.5 kg |
|---|---|
| Damping Factor | 60 (8 ohms, 1 kHz) |
| Channel Separation | 60 dB (1 kHz) |
| Frequency Response | 20Hz to 20kHz |
| Signal to Noise Ratio | 100dB (line) |
| Input Sensitivity | 150mV (line) |
| Speaker Load Impedance | 4-16 ohms |
Critical components require replacement with identical specifications for proper function.
Verify insulation of exposed surfaces after service for safety.
Adjust VR107/VR108 for 5mV±2mV across R217/R218 after power-on.
Components with special characteristics must be replaced with identical parts.
To Next Page
