Need help?Do you have a question about the Yamaha A-S1200 and is the answer not in the manual?
General| Damping factor | 250 |
|---|---|
| Amplifier class | - |
| Frequency range | 20 - 20000 Hz |
| Input sensitivity | 3.5 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.07 % |
| Dynamic power per channel (2 Ohm) | 220 W |
| Dynamic power per channel (4 Ohm) | 190 W |
| Dynamic power per channel (6 Ohm) | 135 W |
| Dynamic power per channel (8 Ohm) | 105 W |
| RMS power output per channel (4 Ohm) | 150 W |
| RMS power output per channel (8 Ohm) | 90 W |
| Speakers connectivity type | Clamp terminals |
| Purpose | Home |
| Product color | Silver |
| Connectivity technology | Wired |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 350 W |
Weight and Dimensions| Depth | 463 mm |
|---|---|
| Width | 435 mm |
| Height | 157 mm |
| Weight | 22000 g |
To Next Page
