Yamaha Bolt XVS95CH - Brake;Tail Light

Periodic maintenance and adjustment
7-31
7
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Install the bulb cover, and then
connect the coupler.
TIP
When installing the headlight bulb cov-
er, make sure the “TOP” mark faces
upwards.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU70540
Brake/tail light
This model is equipped with an LED-
type brake/tail light.
If the brake/tail light does not come on,
have a Yamaha dealer check it.
1. Headlight bulb holder
1
1. “TOP” mark
1
UBP670E0.book Page 31 Monday, July 11, 2016 11:29 AM