• Installing batteries in the remote control
1 Press the
'iT
part and slide the battery
compartment cover off.
2 Insert the two supplied batteries
(AA, R6, UM-3) according to the polarity
markings (+ and
-)
on the inside of the
battery compartment.
3 Slide the cover back until it snaps into place.
12
En
• Using the remote control
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel
of
this unit during
operation.
===::X':::I1
L::~=.~
A"
00000
o.
I
.:;:;.,~-~===I====---r==r-'
•
•
•
30. • 30
0
Approximately 6 m (20 ft)
-------.-~
To Next Page
