Yamaha CDX-397 - Technical Specifications; Audio Section Performance Specifications; General, Power, and Laser Specifications

24 En
SPECIFICATIONS
Audio Section
Frequency response ..................... 2 Hz – 20 kHz, ± 0.5 dB
Harmonic distortion + noise (1 kHz)
................................................................ 0.003 % or less
S/N ratio ...................................................... 105 dB or more
Dynamic range ............................................. 95 dB or more
Output voltage (1 kHz, 0 dB) ............................ 2.0 ± 0.5 V
Headphones output (0 dB)
<CDX-497 only>....................... 660 ± 100 mV/ 32 ohms
Laser Diode Properties
Material .................................................................... GaAlAs
Wavelength .............................................................. 780 nm
Emission Duration ............................................ continuous
Laser Output ................................................ max. 44.6 µW*
* This output is the value measured at a distance of about
200 mm from the objective lens surface on the Optical
Pick-up Block.
General
Power requirements
Australia model .......................................... 240 V, 50 Hz
Europe and U.K. models ..................... 220-240 V, 50 Hz
General model .................. 110-120/220-240 V, 50/60 Hz
Korea model ................................................ 220 V, 60 Hz
China model ................................................ 220 V, 50 Hz
Power consumption ................................................... 13 W
Dimensions (W x H x D) ....................... 435 x 87 x 287 mm
Weight ........................................................................ 3.5 kg
Please note that all specifications are subject to change
without notice.
01_En_02_BOD_CDX-397_497_G.pm 4/27/06, 3:06 PM24