RIVAGE PM7 System Setup Guide
24
7 [ON] key
Switches the channel on or off. If the channel is on,
the key LED will light. In SENDS ON FADER mode,
this key works as an on/off switch for signals sent
from each channel to the currently-selected MIX/
MATRIX bus.
8 Channel name display
Indicates the channel name, fader value, etc.
9 Channel color indicator
Indicates the channel color. You can select the
channel color from 11 options including OFF.
) Fader
This is a touch-sensitive 100mm motorized fader. In
SENDS ON FADER mode, this fader adjusts the send
level of the signal sent from each channel to the
currently-selected MIX/MATRIX bus.
! SAFE R indicator
Lights if the channel is set to Recall Safe.
@ SAFE M indicator
Lights if the channel is set to Mute Safe.
# ISOLATE indicator
Lights if the channel is “Isolated.”
$ [CUE] key
Selects the channel for cue.
To Next Page
Loading...
Need help?
General
