75
REMOTE CONTROL FEATURES
ADVANCED
OPERATION
English
■ Clearing a learned function
You can clear the function learned in a certain
programmed button in each area.
1 Press an input selector button to select the
source component containing the function
you want to clear.
The selected component name appears in the display
window.
2 Press LEARN using a ballpoint pen or similar
object.
“LEARN” and the selected component name appear
alternately in the display window.
y
Complete each of the following steps in 30 seconds.
Otherwise the learning mode will be automatically canceled.
In this case, press LEARN again.
3 Press and hold CLEAR using a ballpoint pen
or similar object, then press the button you
want to clear for about 3 seconds.
“C:OK” appears in the display window.
When you clear a learned function, the button reverts
to the factory preset setting (or manufacturer setting if
you have set manufacturer codes).
4 Repeat step 3 to clear other learned
functions.
5 Press LEARN again to exit.
Clearing individual functions
AB
PHONO
CDMD/CD-RTUNERV- AUX
DVDVCR 1DTV/CBL DVR/VCR2
MULTI CH IN
LEARN
TRANSMIT
RE-NAME
INPUT MODE
STANDBY
SYSTEM
POWER
AB
PHONO
CDMD/CD-RTUNERV-AUX
DVDVCR 1DTV/CBL DVR/VCR2
MULTI CH IN
SLEEP
CLEAR LEARN
To Next Page
Loading...
Need help?
General