To Next PageTo Next PageWhat to do if Yamaha Home Theater System desired station cannot be tuned into with the automatic tuning method?
If the desired station cannot be tuned into with the automatic tuning method on your Yamaha Home Theater System, the signal may be too weak. Use a high-quality directional FM antenna. Also, use the manual tuning method.
Why Yamaha DVX-700 Home Theater System sound is too low on one side?
If the sound is too low on one side of your Yamaha Home Theater System, the cables may be connected improperly. Make sure all cables are connected properly.
What does it mean when Yamaha DVX-700 displays the message “HDMI ERROR” or the picture is not displayed on the HDMI TV screen?
If your Yamaha Home Theater System displays “HDMI ERROR” or the picture isn't showing on the HDMI TV screen, the wrong HDMI resolution may be selected, or an HDMI error may have occurred. Check the HDMI Resolution setting and correct it as necessary. You can also try to reset the HDMI settings.
What to do if Yamaha Home Theater System picture is not displayed on the TV screen correctly?
If the picture is not displayed correctly on the TV screen with your Yamaha Home Theater System, the Video Output settings may be incorrect, so check the Video Output settings and correct as necessary. If the Component Out setting is set to Progressive, but the TV connected to the COMPONENT VIDEO OUTPUT may not support progressive scanning, change the Component Out setting to Interlace. If the TV connected to the HDMI OUTPUT terminal may not support the selected resolution, change the HDMI Resolution setting to a resolution supported by the HDMI TV.
What to do if Yamaha Home Theater System sound is poor (noisy)?
If the sound from your Yamaha Home Theater System is poor and noisy, a speaker cable may be shorted. Make sure all cables are connected properly.
Why is FM stereo reception noisy on Yamaha DVX-700?
Noisy FM stereo reception on your Yamaha Home Theater System can occur if the transmitter is too far away or the antenna quality is poor. Check the antenna connections. You can also try using a high-quality directional FM antenna and using the manual tuning method.
What to do if Yamaha DVX-700 remote control does not operate the system?
If the remote control is not operating your Yamaha Home Theater System, the system may be outside the remote control operation range. The remote control sensor of this system may be exposed to direct sunlight or lighting, so change the lighting. Also, the batteries may be worn out, so replace the batteries.
What to do if Yamaha DVX-700 Home Theater System does not operate properly?
If your Yamaha Home Theater System is not operating properly, it may be due to a strong electrical shock or a drop in power supply. Try setting the system to standby mode, then disconnect the power cable. Wait about 30 seconds, reconnect the power cable, and turn the system on. Additionally, ensure the system control cable is firmly connected.
Why Yamaha Home Theater System speakers make no sound?
If your Yamaha Home Theater System speakers are not producing sound, several factors could be the cause. The volume may be set to the minimum level, so adjust the volume. The mute function may be activated, so cancel the mute function. Also, the input source or input setting may be incorrect, so select the correct input source or input setting. Finally, the cables may be connected improperly, so make sure all cables are connected properly.
What to do if Yamaha DVX-700 power turns on but immediately shuts off?
If your Yamaha Home Theater System turns on but immediately shuts off, there are several potential causes. First, ensure the power cable is firmly plugged into the outlet. A speaker cable may be shorted, so check that all speaker cables are connected properly. Also, the system may have received a strong electrical shock. To resolve this, set the system to standby mode, disconnect the power cable, wait about 30 seconds, reconnect the power cable, and then turn the system on again.
General| Brand | Yamaha |
|---|---|
| Model | DVX-700 |
| Category | Home Theater System |
| Language | English |
Explains graphical symbols used for safety warnings on the unit.
Warns of potential eye injury from direct laser beam exposure when unit is open.
Advises against unauthorized adjustments to prevent hazardous radiation exposure.
Details the buttons, display, and indicators on the front panel of the DVD controller.
Provides detailed explanations of remote control functions for playback and system control.
Identifies and explains the function of each button on the remote control.
Step-by-step guide to connecting speakers and the subwoofer for audio output.
Covers playing DVDs, CDs, DivX, and WMV files, including important notes.
Introduces the setup menus and default settings for various options.
Explains how to adjust sharpness, brightness, contrast, gamma, hue, and chroma.
Instructions for changing passwords, levels, country codes, and DivX VOD registration.
Introduces AIR SURROUND XTREME technology for virtual surround sound.
Introduces XM Satellite Radio service and connecting the Mini-Tuner.
Explains searching channels by all, category, preset, or direct number access.
Covers searching SIRIUS channels via all, category, preset, or direct number access.
Details setting a parental lock PIN and locking/unlocking channels.
Instructions for playing music from an iPod connected via the universal dock.
Step-by-step instructions for pairing and connecting Bluetooth components.
Adjusting audio delay for video sync and using night listening mode for clearer audio.
Instructions for setting preset codes to control TVs and STBs with the remote.
Troubleshooting common problems like power issues, no sound, and improper operation.
Addresses problems with picture display, video output, and noisy FM stereo reception.
Guides on resolving status messages like CHECK XM TUNER and NO SIGNAL.
Troubleshoots SIRIUS tuner errors and unrecognized iPod devices.
Addresses Bluetooth connection errors and issues with disc playback.
Troubleshoots issues with foreign language tracks, subtitles, camera angles, and file playback.
Provides solutions for "NO USB" or "USB ERROR" messages and device compatibility.
