Yamaha F200GET User Manual

5-27
HOUR METER
The hour meter provides the operator with useful at-a-glance information.
It monitors the number of hours a motor has been used since original installation.
* The transaction of time count when the engine is stopped differs on each hour meter and YDIS, therefore
the elapsed time is not always equal on their equipment.
HOUR METER APPLICATIONS
HOUR METER DIMENSIONS
Ref. No. Description Part No. Applicable model
1 Mechanical 6Y5-83504-01
All electrical start models
2
Digital, Black panel 6Y7-83504-00
Digital, White panel 6Y7-83504-10
21
7.5 (0.3)
34.5 (1.36)
31.5 (1.24)
52 (2.05)
62 (2.44)
60 (2.36)
11 (0.43)
71.5 (2.81)
33 (1.3)
52 (2.05)
Mechanical Digital
mm (in.)mm (in.)

Yamaha F200GET Specifications

General

Horsepower	200 hp
Compression Ratio	10.3:1
Lubrication System	Wet Sump
Starting System	Electric
Gear Ratio	1.75:1
Steering	Remote
Trim & Tilt	Power Trim & Tilt
Full Throttle RPM Range	5000-6000 RPM
Fuel Induction System	Electronic Fuel Injection (EFI)
Exhaust	Through Propeller
Ignition System	TCI
Recommended Fuel	Regular Unleaded
Recommended Oil	Yamalube 4M
Shaft Length	25 inches
Engine Type	4-Stroke, DOHC, 16-Valve In-Line 4
Displacement	2785 cc