3-16
E
EMU01576¯
4) Once the engine is supported with the
tilt support lever, push the power trim
and tilt switch “DN” (down) to retract the
trim rods.
CAUTION:
@
Be sure to retract the trim rods com-
pletely during mooring. This protects the
rods from marine growths and corrosion
which could damage the power trim and
tilt mechanism.
@
EMU00303
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch “UP” until
the engine is supported by the tilt rod.
2) Release the tilt-support lever.
3) Push the power trim/tilt switch “DN”
(Down) to lower the engine to the
desired position.
E_69J10.book Page 16 Monday, May 28, 2001 9:52 AM
To Next Page
Loading...
