Yamaha F225F - Motor Specifications and Fluids; Fuel and Oil Recommendations

Specifications and requirements
11
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance EX (cold engine):
0.31–0.38 mm (0.0122–0.0150 in)
Battery rating (CCA/EN):
640–1080 A
Battery rating (20HR/IEC):
80 Ah
Maximum generator output:
70 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
1.75 (21/12)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F225FET M/T
F250DET M/T
F250DET1 M/T
F300BET M/T
F300BET1 M/T
FL225FET ML/TL
FL250DET ML/TL
FL250DET1 ML/TL
FL300BET ML/TL
FL300BET1 ML/TL
Fuel and oil:
Recommended fuel:
F225FET Regular unleaded gasoline
F250DET Regular unleaded gasoline
F250DET1 Regular unleaded gaso-
line
F300BET Premium unleaded gaso-
line
F300BET1 Premium unleaded gaso-
line
FL225FET Regular unleaded gaso-
line
FL250DET Regular unleaded gaso-
line
FL250DET1 Regular unleaded gaso-
line
FL300BET Premium unleaded gaso-
line
FL300BET1 Premium unleaded gas-
oline
Min. research octane number (RON):
F225FET 90
F250DET 90
F250DET1 90
F300BET 94
F300BET1 94
FL225FET 90
FL250DET 90
FL250DET1 90
FL300BET 94
FL300BET1 94
Recommended engine oil:
YAMALUBE 4 or 4-stroke outboard
motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter re-
placement):
6.0 L (6.34 US qt, 5.28 Imp.qt)
Engine oil quantity (with oil filter replace-
ment):
6.3 L (6.66 US qt, 5.54 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
YAMALUBE outboard gear oil or Hy-
poid gear oil
Recommended gear oil grade:
SAE 80W API GL-5 /
SAE 90 API GL-5
6CE-9-74-1E0.book 11 ページ ２０１４年１２月４日 木曜日 午前９時３０分