Yamaha F225F - Operation: Boat Control; Stopping the Boat

Operation
53
EMU40412
Outboard motor
 Check that the outboard motor is mounted
properly and check the outboard motor
mounting bolts for looseness.
 Check the propeller for damage.
 Check for engine oil leaks.
EMU40372
Flushing device
Check that the flushing device is securely
tightened on to the fitting on the bottom cowl-
ing. NOTICE: Make sure to connect the
garden hose connector to the fitting on
the bottom cowling and tighten it secure-
ly. Otherwise, cooling water will leak out
during operation, causing the engine to
overheat.
[ECM02292]
EMU40752
Installing top cowling
1. Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
by a Yamaha dealer.
1. Oil dipstick
2. Upper mark
3. Lower mark
1
2
3
ZMU06918
1. Flushing device
2. Garden hose connector
3. Fitting
1. Rubber seal
2. Bottom cowling
2
3
1
ZMU07158
2
1
ZMU07159
6CE-9-74-1E0.book 53 ページ ２０１４年１２月４日 木曜日 午前９時３０分