Operation
66
3. Push the power trim and tilt switch “ ”
(down) to lower the outboard motor to
the desired position.
EMU28063
Shallow water
EMU40702
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM02361
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU35237
Procedure for power trim and tilt models
1. Place the control lever in neutral.
1. Cooling water inlet
6CE-9-74-1E0.book 66 ページ ２０１４年１２月４日 木曜日 午前９時３０分
To Next Page
Loading...
