Operation
47
2. Move the remote control lever / gear shift
lever firmly and crisply forward (for for-
ward gear) or backward (for reverse
gear) [about 35° (a detent can felt) for re-
mote control models].
IP:
Tiller handle models: The gear shift lever op-
erates only when the throttle grip is in the fully
closed position.
To shift from in gear (forward/reverse) to neu-
tral
1. Close the throttle so that the engine
slows to idle speed.
2. After the engine is at idle speed in gear
move the remote control lever / gear shift
lever firmly and crisply into the neutral po-
sition.
1. Neutral interlock trigger
U6D625E0.book Page 47 Thursday, March 13, 2008 9:06 AM
To Next Page
Loading...
