4-20
GB
EMU01330
REPLACING FUSE
If a fuse has blown, remove the electrical
cover, open the fuse holder and remove
the fuse with a fuse puller. Replace it with
a spare one of proper amperage.
w
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
hazard.
NOTE:
If the new fuse blows again immediately,
consult a Yamaha dealer.
1 Electrical cover
2 Fuse holder
3 Fuse (30A × 1, 20A × 1)
4 Spare fuse (30A, 20A)
5 Fuse puller
F1025E
t
67F-9-76-A0-4b 4/1/02 4:06 PM Page 14
To Next Page
Loading...
Need help?
General
