5-8
GB
EMU00435*
ENGINE FAILS TO OPERATE
In the unlikely event of an ignition control
system malfunction, the engine speed
may become erratic or the engine may
stop.
In such a case, follow the procedure
below.
1) Remove the electric cover 1.
2) Disconnect the connection of the yel-
low cord 2 (emergency circuit) to
return to the nearest port.
w
When the connection is disconnected, the
idling and low speeds are slightly higher
than normal. Use care when starting off
or stopping.
cC
Follow this procedure only in an emer-
gency and just long enough to return to
port for repairs.
w
F1046
67F-9-76-A0-5 4/1/02 4:07 PM Page 22
To Next Page
Loading...
Need help?
General
