Yamaha FINN - Page 39

Periodic maintenance and adjustment
7-4
7
9
* Wheels (cast) • Check runout and for damage. √√√√
* Wheels (spoke)
• Check runout, spoke tightness
and for damage.
• Tighten spokes if necessary.
√√√√√
10 * Tires
• Check tread depth and for dam-
age.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√√√√√
11 * Wheel bearings
• Check bearings for looseness or
damage.
√√√√
12 * Swingarm
• Check operation and for exces-
sive play.
√√√√
• Lubricate with lithium-soap-
based grease.
Every 12000 km (7500 mi)
13 Drive chain
• Check chain slack, alignment and
condition.
• Adjust and thoroughly lubricate
chain with engine oil.
Every 1000 km and after washing the motorcycle or riding in the rain
14 * Steering bearings
• Check bearing play and steering
for roughness.
√√√√√
• Lubricate with lithium-soap-
based grease.
Every 12000 km (7500 mi)
15 * Chassis fasteners
• Make sure that all nuts, bolts and
screws are properly tightened.
√√√√√
16
Brake lever pivot
shaft
• Lubricate with silicone grease. √√√√√
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING (whichever comes first)
ANNUAL
CHECK
1000 km
or
2 months
4000 km
or
6 months
8000 km
or
10 months
12000 km
or
14 months
16000 km
or
18 months
UB6FE2E0.book Page 4 Tuesday, June 8, 2021 1:58 PM