Yamaha FL300A - Selecting Outboard Motor (Triple Engine)

Operation
83
EMU35880
Selecting outboard motor
(triple engine)
After all engines have started, set all control
levers to Neutral. Push the engine selector
switch repeatedly to change the digital elec-
tronic control-active indicator and select the
desired engine.
1. First, three engines can be operated.
TIP:
When all engines have started, the center
engine will run at the average speed of port
side and starboard side engines’ speeds.
●
Operate the port side engine using the port
side control lever.
● The center engine runs at the average
speed of port side and starboard side en-
gines’ speeds.
● Operate the starboard side engine using
the starboard side control lever.
2. Push the engine selector switch once to
operate the port side and starboard side
engines.
●
Operate the port side engine using the port
1. Port side control lever
2. Starboard side control lever
3. Port side engine
4. Center engine
5. Starboard side engine
ZMU05998
PC
S
1
2
3
54
ZMU05999
ZMU06000
ZMU06001
6AW-9-18.book 83 ページ ２０１０年３月２２日 月曜日 午前１１時３５分
©2019 Yamaha Motor Corporation, U.S.A.