Yamaha FT8DE - Page 17

Specifications and requirements
11
Control system:
F8CMH Tiller handle
FT8DE Remote control
FT8DEP Remote control
FT8DMH Tiller handle
Starting system:
F8CMH Manual starter
FT8DE Electric starter
FT8DEP Electric starter
FT8DMH Manual starter
Starting carburetion system:
Choke valve
Valve clearance (cold engine) IN:
0.15–0.20 mm (0.0059–0.0079 in)
Valve clearance (cold engine) EX:
0.20–0.25 mm (0.0079–0.0098 in)
Min. cold cranking amps (CCA/EN):
FT8DE 347.0 A
FT8DEP 347.0 A
Min. rated capacity (20HR/IEC):
FT8DE 40.0 Ah
FT8DEP 40.0 Ah
Maximum generator output:
6 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
F8CMH 2.08(27/13)
FT8DE 2.92(38/13)
FT8DEP 2.92(38/13)
FT8DMH 2.92(38/13)
Trim and tilt system:
F8CMH Manual tilt
FT8DE Manual tilt
FT8DEP Power tilt
FT8DMH Manual tilt
Propeller mark:
F8CMH N
FT8DE R
FT8DEP R
FT8DMH R
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. research octane:
90
Fuel tank capacity:
12.0 L (3.17 US gal, 2.64 Imp.gal)
Recommended engine oil:
4-stroke outboard motor oil
Recommended engine oil group 1*:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Recommended engine oil group 2*:
SAE 15W-40/20W-40/20W-50
API SH/SJ/SL
Engine oil quantity:
0.8 L (0.85 US qt, 0.70 Imp.qt)
Lubrication:
Wet sump
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
F8CMH 0.150 L (0.159 US qt,
0.132 Imp.qt)
FT8DE 0.370 L (0.391 US qt,
0.326 Imp.qt)
FT8DEP 0.370 L (0.391 US qt,
0.326 Imp.qt)
FT8DMH 0.370 L (0.391 US qt,
0.326 Imp.qt)
Tightening torque for engine:
Spark plug:
25.0 Nm (2.55 kgf-m, 18.4 ft-lb)
U60R76E0.book Page 11 Monday, April 26, 2010 3:39 PM