EasyManua.ls Logo

Yamaha HTR-5140 User Manual

Yamaha HTR-5140
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Printed in Malaysia ID
V343260
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
HTR-5140
HTR-5140
Natural Sound AV Receiver
Ampli-Tuner Audio-Video
OWNER’S MANUAL
MODE D’EMPLOI
U C A T
05HTR-5140-e/f cv1/4 6/22/99, 2:41 PM1
Question and Answer IconNeed help?

Do you have a question about the Yamaha HTR-5140 and is the answer not in the manual?

Yamaha HTR-5140 Specifications

General IconGeneral
TypeAV receiver
Channels5.1
Frequency Response10 Hz - 100 kHz
Input Impedance47 kΩ
Dimensions (W x H x D)435 x 151 x 391mm
Weight9.8kg
Surround SoundDolby Digital, DTS
Input Sensitivity200 mV
Signal to Noise Ratio100 dB
Signal-to-Noise Ratio100 dB
Total Harmonic Distortion0.06% (1kHz)
Input Sensitivity/Impedance200 mV / 47 kΩ
Video Inputs/Outputs3 Inputs, 1 Output
Audio Inputs/Outputs4 Inputs, 1 Output
Digital Audio InputsOptical (2), Coaxial (1)

Summary

SAFETY INSTRUCTIONS

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

Details the buttons and controls located on the front panel of the AV receiver for operation and settings.

REMOTE CONTROL TRANSMITTER

Components which can be controlled

Lists the components that can be controlled by the remote, such as AMP/TUNER, CD, DVD/LD, VCR, TV, TAPE/MD, CBL/DBS.

SPEAKER SETUP

SPEAKER CONFIGURATION

Explains how to configure speaker setups, including 5-speaker and 4-speaker configurations for optimal sound.

SPEAKER PLACEMENT

CONNECTIONS

CONNECTIONS WITH OTHER COMPONENTS

Provides instructions on how to connect the unit to various other audio and video components correctly.

CONNECTING TO DIGITAL (COAXIAL AND/OR OPTICAL) TERMINALS

CONNECTING SPEAKERS

Speaker Connection Types

Guides on connecting main, rear, and center speakers, as well as a subwoofer system to the unit.

IMPEDANCE SELECTOR SWITCH

ADJUSTMENTS BEFORE USING THIS UNIT

SELECTING THE OUTPUT MODES

Guides on selecting output modes for speakers (CNTR, REAR, MAIN, BASS, M.LVL) to match the connected speaker system.

SPEAKER BALANCE ADJUSTMENT

BASIC OPERATIONS

TO PLAY A SOURCE

Step-by-step instructions on how to select and play an audio or video source using the unit.

TUNING OPERATIONS

MANUAL PRESET TUNING

AUTOMATIC PRESET TUNING (for FM stations only)

USING THE DIGITAL SOUND FIELD PROCESSOR (DSP)

BRIEF OVERVIEW OF DIGITAL SOUND FIELD PROGRAMS

Provides descriptions and features for various DSP programs like DOLBY PRO LOGIC, DOLBY DIGITAL, and CINEMA DSP modes.

PLAYING AN AUDIO/VIDEO SOURCE WITH THE DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT

To enjoy a video source with Dolby Pro Logic Surround or Dolby Digital-decoded

ADJUSTING THE DELAY TIME AND SPEAKER OUTPUT LEVELS

ADJUSTMENTS IN THE “SET MENU” MODE

AMP<TUNER> MODE

TAPE/MD MODE

CD MODE

DVD/LD MODE

DVD MENU MODE

Describes how to use the remote control for DVD menu operations, including navigation and selection.

VCR MODE

TV MODE

Details how to control TV functions using the remote, including channel selection, volume, and input settings.

CBL/DBS MODE

Explains how to operate cable TV or DBS tuner functions using the remote control transmitter.

SETUP CODES

Presetting the remote control transmitter

Step-by-step guide on how to preset manufacturer codes for controlling various components with the remote.

Returning to the factory-set codes

Instructions on how to reset components to their original factory-set codes or return all components to factory defaults.

TROUBLESHOOTING

SPECIFICATIONS

Related product manuals