How to resolve no sound from the rear center speaker on Yamaha HTR-5560?
If there is no sound from the rear center speaker on your Yamaha Receiver: * Check that “1C REAR LR” or “1D REAR CT” on the SET MENU is set to LRG or SML. * Ensure the Dolby Digital EX decoder or the DTS-ES compatible decoder is turned on by pressing the EX/ES button on the remote control.
What to do if no sound from the rear speakers of Yamaha Receiver?
If there is no sound from the rear speakers of your Yamaha Receiver: * Raise the output level of the rear speakers. * If a monaural source is being played with program 9, select another DSP program.
How to fix no sound from the center speaker on Yamaha HTR-5560 Receiver?
If there is no sound from the center speaker on your Yamaha Receiver: * Increase the level of the center speaker. * Check that “1A CENTER” on the SET MENU is set to the appropriate mode for your center speaker. * If one of the Hi-Fi DSP programs (1 to 4) has been selected (except for 6ch Stereo), select another DSP program.
What to do if no sound from the effect speakers of Yamaha HTR-5560?
If there is no sound from the effect speakers of your Yamaha Receiver: * Press STEREO/EFFECT to turn the sound effect on. * If using a Dolby Surround, Dolby Digital or DTS decoding DSP program with material not encoded with these formats, select another DSP program.
What to do if there is no sound from the subwoofer of Yamaha HTR-5560?
If there is no sound from the subwoofer of your Yamaha Receiver, check these settings in the SET MENU: * If “1E BASS” is set to MAIN while playing a Dolby Digital or DTS signal, change it to SWFR or BOTH. * If “1E BASS” is set to SWFR or MAIN while playing a 2-channel source, change it to BOTH.
What to do if my Yamaha HTR-5560 Receiver remote control does not work?
If the remote control for your Yamaha Receiver isn't working, try these steps: * Ensure you are within 6 meters (20 feet) and no more than 30 degrees off-axis from the front panel. * Make sure direct sunlight or strong lighting isn't interfering with the remote control sensor. Reposition the unit if necessary. * Replace all batteries with new ones. * Ensure the manufacture code is correctly set.
Why does my Yamaha Receiver suddenly go off?
If your Yamaha Receiver suddenly goes off, it could be due to: * Activation of the protection circuit due to a short circuit. Check the IMPEDANCE SELECTOR switch position and then turn the unit back on. * The sleep timer. Turn the power back on and play the source again. * The sound being muted. Press MUTE or any operation buttons to cancel mute.
What to do if Yamaha HTR-5560 Receiver fails to turn on?
If your Yamaha Receiver fails to turn on, consider the following: * Ensure the power cord is firmly connected. * Verify the IMPEDANCE SELECTOR switch on the rear panel is fully set to either the left or right position when the unit is in standby mode. * Check speaker wire connections for any shorts that may have activated the protection circuitry. Ensure wires only touch their respective connections. * If the unit experienced a strong electric shock, set it to standby, disconnect the power cord for 30 seconds, then reconnect and try again.
General| Channels | 6.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.06% |
| Input Sensitivity | 200 mV |
| Signal-To-Noise Ratio | 100 dB |
| Input Impedance | 47 kOhms |
| Surround Sound Effects | Yes |
| Sound Effects | Yes |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Audio D/A Converter | 192 kHz/24-bit |
| Built-in Decoders | Dolby Digital, DTS |
| Tuning Range | FM: 87.5-108MHz, AM: 530-1710kHz |
| Digital Audio Inputs | Optical, Coaxial |
| Video Inputs/Outputs | Composite, S-Video |
General safety warnings and precautions for operating the unit to prevent hazards.
Specific warnings to prevent fire or electric shock by not removing covers.
Warning against unauthorized modifications that could void FCC authorization.
Guidance on connecting and placing speakers for optimal sound.
Guide to connecting various external audio and video components.
Using the test tone generator to balance speaker volumes for optimal sound.
Accessing and adjusting various system settings via menus.
Common problems and their solutions for the AV receiver.
To Next Page