What causes noise interference from digital equipment on Yamaha HTR-5635?
If you're experiencing noise interference from digital or high-frequency equipment affecting your Yamaha Receiver, the solution is to move the unit further away from such equipment.
What to do if the volume level cannot be increased on Yamaha Receiver?
If the volume level on your Yamaha Receiver cannot be increased or the sound is distorted, check if the component connected to the OUT (REC) jacks of this unit is turned off. If so, turn on the power to that component.
Why can't I change sound field parameters on my Yamaha HTR-5635 Receiver?
If the sound field parameters and other settings on your Yamaha Receiver cannot be changed, check if “10 MEM. GUARD” in the SET MENU is set to ON. If it is, set it to OFF.
What does 'CHECK SP WIRES' mean on my Yamaha HTR-5635 Receiver?
If “CHECK SP WIRES” appears on the front panel display of your Yamaha Receiver, it indicates that the speaker cables are short-circuited. Ensure all speaker cables are connected correctly.
Why does my Yamaha HTR-5635 Receiver suddenly turn into standby mode?
If your Yamaha Receiver suddenly turns into standby mode, it's likely because the internal temperature has become too high, activating the overheat protection circuitry. Wait for the unit to cool down before turning it back on.
How to fix noisy FM stereo reception on Yamaha Receiver?
If you are experiencing noisy FM stereo reception on your Yamaha Receiver, check the antenna connections. The issue may be due to the characteristics of FM stereo broadcasts when the transmitter is far away or the antenna input is poor. Try using a high-quality directional FM antenna.
General| Channels | 6.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.06% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Impedance | 47 kOhms |
| Signal-To-Noise Ratio | 100 dB |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 192 kHz/24-bit |
| Surround Sound Effects | Yes |
| Digital Sound Processor (DSP) | Yes |
| DSP Preset Qty | 14 |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Dimensions (W x H x D) | 435 x 151 x 390 mm |
| Built-in Decoders | Dolby Digital, DTS |
Alerts to the presence of dangerous voltage or important operating/maintenance instructions.
Covers installation, environment, usage, and maintenance precautions for safe operation.
Guides on speaker types, placement, and subwoofer integration for optimal sound.
Instructions on connecting speaker cables to the appropriate terminals correctly.
Explains how to set the impedance selector switch based on speaker impedance.
Summarizes the 5 SPEAKER SET items and their initial default settings.
Details how to use the unit's test tone generator for speaker level adjustment.
Guides on selecting input sources and modes for basic audio playback.
Details how to automatically and manually preset FM and AM radio stations.
Explains how to access and adjust the various settings available in the SET MENU.
Details the settings for center, main, and rear speaker modes and sizes.
Configures rear speaker modes, LFE/bass output, and main speaker level settings.
Guides on adjusting output levels for center, rear, and subwoofer speakers.
Explains how to adjust the delay time for DSP sound effects.
Addresses common issues like power failure, no sound, and connection problems.
Solves problems related to tuner reception and remote control malfunctions.
To Next Page
