How to fix Yamaha Stereo System that won't turn on?
If your Yamaha Stereo System isn't turning on, the power cable might not be properly connected. Reconnect the power cable firmly into both the wall outlet and the unit.
Why can't I establish a Bluetooth connection on my Yamaha ISX-B820?
If you are unable to establish a Bluetooth connection with your Yamaha Stereo System, the unit may not be registered on the other component’s Bluetooth connection list. Perform the pairing operations again.
Why can't I pair my Yamaha Stereo System with another Bluetooth component?
If your Yamaha Stereo System is experiencing Bluetooth connection issues, ensure that the component you are trying to pair with supports A2DP. If a Bluetooth adapter is being used, verify that its password is “0000”. Ensure that the devices are not too far apart and move them closer if needed. Keep the unit away from devices emitting radio-frequency signals, such as microwave ovens or wireless LAN devices.
What to do if Yamaha Stereo System does not operate properly?
If your Yamaha Stereo System does not operate properly, it may have experienced a strong electrical shock or a drop in power supply. Turn the system off, disconnect the power cable, wait about 30 seconds, reconnect the power cable, and turn the system back on.
What to do if Yamaha ISX-B820 sound suddenly turns off?
If your Yamaha Stereo System suddenly turns off, the sleep function may be enabled. Turn the system on and play the source again.
Why is the sound cracked or distorted on my Yamaha ISX-B820?
If your Yamaha Stereo System is producing cracked, distorted, or abnormal noise, the input source volume or the unit's volume (especially Bass) may be too high. Adjust the volume using the VOLUME control, or adjust the Bass using the EQ.
What to do if the Yamaha Stereo System remote control does not work?
If your Yamaha Stereo System remote control isn't working, ensure you're within the remote's operational range. Check for any obstructions between the remote and the unit. Also, verify that the batteries aren't depleted, and replace them if necessary. Finally, avoid direct sunlight or lighting on the unit's remote control signal receiver; adjust the lighting or unit orientation if needed.
Why is there no sound coming from my Yamaha Stereo System?
If your Yamaha Stereo System isn't producing sound, first, check the volume level and adjust it if it's set too low. Also, make sure you've selected the correct source for your audio.
How to fix too much noise during stereo broadcast on Yamaha Stereo System?
Try manual tuning to improve the signal quality or use a commercially available outdoor antenna.
General| Product color | White |
|---|---|
| Housing material | - |
| Recommended usage | Speaker set unit |
| Suitable for outdoor use | No |
| Tweeter | Yes |
| Woofer diameter | 100 mm |
| Tweeter diameter | 30 mm |
| Number of drivers | 2 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Impedance | - Ω |
| Frequency range | - Hz |
| RMS rated power | - W |
| Audio formats supported | MP3, WMA |
| Bluetooth range | 10 m |
| USB 2.0 ports quantity | 1 |
| Connectivity technology | Wired & Wireless |
| Power source type | AC |
Weight and Dimensions| Depth | 85.7 mm |
|---|---|
| Width | 410 mm |
| Height | 997 mm |
| Cord length | 2.1 m |
| Depth (with stand) | 295 mm |
Identification and function of controls on the top surface.
Step-by-step guide for connecting an iPod device.
Explains the indicators and information shown on the front display.
Identifies connectors and switches on the back of the unit.
Details the buttons and functions of the remote control.
Specific buttons on the unit for iPod operation.
Procedure for setting the current time on the unit.
How to change between different clock display modes.
Instructions for playing music from a connected iPod.
How to enable repeat and shuffle modes for iPod playback.
Guide for playing standard audio CDs.
Instructions for playing data CDs with music files.
Steps for playing music files from a USB storage device.
How to enable repeat and shuffle modes for USB playback.
Process for establishing a Bluetooth connection.
How to play music wirelessly from a Bluetooth device.
Steps to reconnect previously paired Bluetooth devices.
Procedures for ending an active Bluetooth session.
How to tune into FM radio stations.
Method for saving favorite FM stations for quick access.
Explanation of the three available alarm sound modes.
Options for selecting music sources for alarm playback.
Guide for configuring alarm time and selecting the alarm mode.
How to activate or deactivate the alarm function.
Actions available during alarm playback, including snooze.
Solutions for common operational problems and unit issues.
Troubleshooting specific issues related to iPod connection and playback.
Solutions for problems encountered during CD playback.
Troubleshooting tips for USB device connectivity and playback.
Solutions for issues related to Bluetooth pairing and connection.
Tips for improving FM signal quality and reducing noise.
Troubleshooting common problems with the remote control.
Details on compatible CD types and handling precautions.
Information on compatible USB devices and file formats.
Specifications for playing MP3 and WMA audio file formats.
Guidelines for safely handling and cleaning discs.
Details specifications for iPod, CD, USB, and AUX playback.
Covers the FM tuning range of the unit.
Includes power supply, power consumption, and physical dimensions.
Details Bluetooth version, protocols, output, and communication distance.
Provides compatibility and usage notes for iPod and iPhone.
To Next Page
