FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-2
2
3
4
5
6
7
8
9
Rear brake
●
Check operation.
●
If soft or spongy, have Yamaha dealer bleed hydraulic system.
●
Check brake pads for wear.
●
Replace if necessary.
●
Check fluid level in reservoir.
●
If necessary, add recommended brake fluid to specified level.
●
Check hydraulic system for leakage.
7-24, 7-26
Throttle grip
●
Make sure that operation is smooth.
●
Check cable free play.
●
If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
7-21, 7-28
Wheels and tires
●
Check for damage.
●
Check tire condition and tread depth.
●
Check air pressure.
●
Correct if necessary.
7-22, 7-24
Brake levers
●
Make sure that operation is smooth.
●
Lubricate lever pivoting points if necessary.
7-28
Centerstand, sidestand
●
Make sure that operation is smooth.
●
Lubricate pivots if necessary.
7-29
Chassis fasteners
●
Make sure that all nuts, bolts and screws are properly tightened.
●
Tighten if necessary.
—
Instruments, lights, signals
and switches
●
Check operation.
●
Correct if necessary.
—
Sidestand switch
●
Check operation of ignition circuit cut-off system.
●
If system is not working correctly, have Yamaha dealer check vehicle.
4-16
ITEM CHECKS PAGE
✼✦✧✯✪✥✲✣ ✥
To Next Page
Loading...
