Yamaha MCP1 - Table of Contents

5MCP1 Installation Manual
Contents
PRECAUTIONS .....................................................................3
Introduction .......................................................................6
Controls and Connectors ........................................................7
Front Panel................................................................................................. 7
Rear Panel.................................................................................................. 8
Connections with an MTX/MRX system .......................................9
Function tree.................................................................... 10
Installation ...................................................................... 11
Setting the UNIT ID ............................................................. 13
Removal.......................................................................... 14
Initializing the MCP1 .......................................................... 14
Alert list.......................................................................... 15
Specifications .................................................................. 17
Dimensions ...................................................................... 18
Included items
•Mounting plate
•Surface mount box
• Side panel × 2
•Main unit — mounting plate screws × 4 (with washers)
•Mounting plate — surface mount box screws × 4 (without washers)
• MCP1 installation manual (this document)
Firmware update
MTX-MRX Editor is used to update the firmware of the MCP1 and to check the version.
For details on how to perform these operations, refer to “MTX-MRX Editor User Guide.”
The latest firmware can be downloaded from the download page of the following website.
http://www.yamahaproaudio.com/