Why does my Yamaha mcr-b020 Stereo System display “CD No Disc” or “CD Unknown”?
If the front panel display of your Yamaha Stereo System shows “CD No Disc” or “CD Unknown,” ensure that the disc is compatible with the unit. Also, check the disc for dirt or foreign objects and clean it if necessary. Make sure the disc contains playable files and is inserted with the label facing upward.
How to fix Yamaha Stereo System when speakers make no sound?
If your Yamaha Stereo System speakers aren't producing sound, try these steps: First, ensure the volume isn't set too low or muted and adjust it accordingly. Next, verify that you've selected the correct source input. Also, disconnect any headphones that might be plugged in. Finally, if you're using an external device, make sure its volume is turned up.
Why can’t I establish a Bluetooth connection on my Yamaha mcr-b020?
If you can't establish a Bluetooth connection with your Yamaha Stereo System, it may be because the unit isn't registered on the Bluetooth device's connection list. Try performing the pairing operations again. Also, make sure that BLUETOOTH is set to ON in the unit's option menu.
What to do if Yamaha mcr-b020 sound is cracked or distorted?
If your Yamaha Stereo System is producing cracked, distorted sound, or abnormal noise, the input source volume or the unit's volume (especially bass) may be too high. Try adjusting the volume using the VOLUME control or adjust the bass range in the option menu. If using an external device, lower its volume.
Why does my Yamaha mcr-b020 sound suddenly turns off?
If your Yamaha Stereo System suddenly turns off, it might be due to the sleep timer setting. Turn the unit back on and play the source again. Alternatively, the auto power standby function may be activated. This function turns off the unit automatically after a set period of inactivity, specifically when the time specified for AUTO PWR STDBY in the option menu has elapsed or after 20 minutes of inactivity following USB device or CD playback.
What to do if Yamaha mcr-b020 remote control does not work properly?
If the remote control for your Yamaha Stereo System isn't working correctly, consider these potential solutions: * Make sure you are within the remote control's operational range. * Ensure that there are no obstacles blocking the signal between the remote and the unit. * Try changing the lighting or the unit's orientation if it's exposed to direct sunlight or certain types of lighting. * Replace the battery with a new one.
Why can't I pair my Yamaha Stereo System with a Bluetooth device?
If you are unable to pair your Yamaha Stereo System with a Bluetooth device, it could be due to several reasons. The Bluetooth device may not support A2DP, so ensure you are using a device that does. If you're using a Bluetooth adapter, make sure its password is “0000.” The unit and the Bluetooth device might be too far apart; move them closer. Interference from other devices (like microwave ovens or wireless LAN) operating in the 2.4 GHz frequency band could also be the issue; move the unit away from these devices. Finally, check that BLUETOOTH is set to ON in the option menu.
How to fix too much noise on Yamaha Stereo System?
If you are experiencing too much noise, it could be due to an improperly connected antenna. Make sure the antenna is connected properly or consider using a commercially available outdoor antenna. Another cause could be the antenna's proximity to the unit or other electronic devices. Try positioning the antenna as far away as possible from these devices.
What to do if the Yamaha Stereo System unit does not operate properly?
If your Yamaha Stereo System unit isn't operating correctly, it may have experienced a strong electrical shock, such as lightning, excessive static electricity, or a drop in power supply. To resolve this, press the reset button on the rear panel of the unit using a fine-tipped stick and restart the unit.
What to do if my Yamaha Stereo System sound suddenly turns off?
If the sound on your Yamaha Stereo System suddenly turns off, it could be due to the sleep timer being set. In this case, turn the unit on and play the source again. Alternatively, the auto power standby function may have activated. This function turns off the unit automatically after a period of inactivity (either when the time specified for AUTO PWR STDBY in the option menu has elapsed or when 20 minutes have elapsed without any operation being performed after stopping USB device or CD playback).
General| Type | Home audio micro system |
|---|---|
| Cassette deck | No |
| Product color | Black |
| Optical disc player | Yes |
| Number of optical discs | 1 discs |
| Impedance | 6 Ω |
| Speaker type | - |
| Frequency range | 50 - 20000 Hz |
| RMS rated power | 30 W |
| Woofer diameter | 10 mm |
| Number of speakers | 2 |
| Total Harmonic Distortion (THD) | 10 % |
| Tuner type | Digital |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | FM |
| Preset stations quantity | 60 |
| Volume control | Rotary |
| Power source | AC |
| Input voltage | 100-240 V |
| Input frequency | 50 - 60 Hz |
| Power consumption (standby) | 3 W |
| Power consumption (typical) | 21 W |
| Bluetooth version | 4.0 |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Bluetooth profiles | A2DP, AVRCP |
| Apple docking compatibility | Not supported |
| Audio formats supported | MP3, WMA |
Weight and Dimensions| Main unit weight | 1800 g |
|---|---|
| Main unit dimensions (WxDxH) | 180 x 279 x 143 mm |
Proper unit placement, ventilation, and environmental conditions for optimal performance.
Critical safety advice on voltage, lightning, batteries, hearing, and product warnings.
Instructions for connecting speakers and FM/AM antennas to the unit.
Step-by-step guide for playing music from a CD.
Instructions for playing music from a connected USB device.
Detailed steps for pairing and playing music wirelessly via Bluetooth.
Common operational issues with the unit and their corresponding solutions.
Troubleshooting steps for problems encountered with the remote control.
Solutions for common problems encountered during CD playback.
Solutions for problems related to Bluetooth pairing, connection, and audio interruption.
Solutions for issues related to USB device playback, including recognition and file compatibility.
Troubleshooting steps for issues with FM/AM radio reception, such as noise.
To Next Page
