Why is the iPod/iPhone signal not outputting from my Yamaha Music Mixer?
If the iPod/iPhone signal is not outputting from your Yamaha Music Mixer, verify that the output signal assignment is set appropriately. Also, check if the iPod indicator is turned off.
How do I output a monitor signal for the Yamaha Music Mixer through speakers?
To output a monitor signal for the mixer through speakers, connect a powered speaker to the MONITOR OUT jack. Make sure to adjust the level of output signal from the MONITOR OUT jack with the MONITOR knob.
General| Frequency range | 20 - 20000 Hz |
|---|---|
| Channels quantity | 32 channels |
| Digital sound processing | - bit |
| Phantom power | 48 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 86 W |
| DJ mixer | - |
| Apple docking | Yes |
| Product color | Black |
| Video capability | No |
| Total Harmonic Distortion (THD) | 0.02 % |
Weight and Dimensions| Depth | 565 mm |
|---|---|
| Width | 1027 mm |
| Height | 169 mm |
| Weight | 19000 g |
Precautions for power cord usage, including warnings against damage and improper grounding.
Warnings regarding exposure to water and fire risks.
Instructions for safe device operation and responses to abnormalities.
Guidelines for proper device placement and ventilation to prevent overheating.
Precautions for connecting devices and cleaning the unit.
Warnings against inserting fingers, dropping objects, or misuse.
Notices on cleaning, dust, vibration, and temperature effects.
Information regarding copyrights, manual conventions, and trademarks.
Details on the Class-A mic preamplifiers and their sonic characteristics.
Explanation of X-pressive EQ, REV-X, and SPX effects for sound enhancement.
Features of the USB recorder and iPod/iPhone port.
Overview of Ducker, Leveler, Stereo Image, and model variations.
Information about the MGP Editor software for mixer control.
Steps for preparing power and powering up the system correctly.
Instructions for connecting devices and achieving sound output.
Description of the controls and connections on the top panel.
Description of the inputs and outputs on the rear panel.
Detailed explanation of input and master control blocks on the top panel.
Detailed explanation of rear panel connector sections.
Controls for mono and stereo input channels.
Details on PAD, +48V, GAIN, HPF, and COMP controls.
Operation of Ducker, Leveler, and Stereo Image functions.
Adjusting tone with the three-band equalizer.
Controls for sending signals to AUX and FX buses.
Controls for panning, signal enabling, and status indicators.
Assigning channels to buses and PFL monitoring.
Adjusting channel output levels with faders.
Using the USB device for recording and playback.
Connecting and playing music from iPod/iPhone.
Overview of the display screen and its associated buttons/knobs.
Explanation of the meter select button and level meters.
Adjusting effect send levels and blending FX signals.
Setting delay time via TAP and managing FX RTN signals.
Routing effect return signals and monitoring them.
Adjusting AUX bus signal levels to SEND jacks.
Adjusting GROUP and STEREO signals to MATRIX OUT.
Routing USB and iPod/iPhone signals to buses.
Adjusting headphone and monitor output levels.
Adjusting talkback level and routing to buses.
Controlling GROUP signal pan, ON status, and bus assignment.
Adjusting the mono output level and related indicators.
Adjusting the stereo output level and related indicators.
Details on mono and stereo input/output jacks.
Details on MATRIX and MONITOR output jacks.
Information on INSERT, TALKBACK, LAMP, GROUP, STEREO, MONO, and SEND jacks.
AC IN connector and power switch operation.
Understanding the display screens and their elements.
Explains confirmation, message, warning, and error screens.
How to switch pages and change parameter values.
Adjusting display contrast and backlight brightness.
Steps to select and apply effects like REV-X and SPX.
Adjusting specific parameters for selected effects.
Sending FX2 to FX1 for combined effect processing.
Viewing and operating FX1 and FX2 programs/parameters on one screen.
Introduction to GEQ and initial setup procedures.
Adjusting frequency bands and gain levels in the GEQ.
Enabling L/R link for simultaneous stereo EQ adjustments.
Using GEQ to identify and reduce feedback points.
Procedures for loading and saving GEQ presets.
Specifying compressor settings, threshold, and type.
Fine-tuning compressor parameters like ratio and attack.
Saving customized compressor settings as user programs.
Understanding signal paths and USB device requirements.
Step-by-step guide for recording audio to a USB drive.
Assigning USB playback output to STEREO, MONITOR, or specific channels.
Using transport buttons for playback control.
Moving between songs during playback.
Connecting and playing music from iPod/iPhone.
Configuring recording and playback parameters.
Using LPF for subwoofer applications.
Automatic background music volume reduction.
Fine-tuning the Ducker function parameters.
Maintaining consistent sound volume automatically.
Solutions for power-on failures and lack of audio output.
Troubleshooting STEREO, AUX, MONITOR, and audio quality issues.
Resolving problems with effects and USB recording.
Solutions for iPod/iPhone recognition and stereo volume imbalance.
Addressing inconsistent sound levels and Leveler function problems.
List and descriptions of REV-X reverb programs.
List and descriptions of SPX multi-effects programs.
Detailed parameters for REV-X and SPX effects.
Detailed parameters for COMP, DUCKER, and LEVELER functions.
Technical specifications related to electrical properties.
Detailed specifications for analog input and output terminals.
Comprehensive list of general technical data for the unit.
Contact details for Yamaha representatives in North and Latin America.
Contact details for Yamaha representatives in Europe and Africa.
Contact details for Yamaha representatives in the Middle East, Asia, and Oceania.
To Next Page
