Need help?Do you have a question about the Yamaha MT1X and is the answer not in the manual?
General| Tape Speed | 4.76 cm/s |
|---|---|
| THD | 0.8% |
| Signal-to-Noise Ratio (Normal Tape) | 58 dB |
| Inputs | Line In, Mic In |
| Outputs | Line Out, Headphone |
| Motor | DC servo motor |
| Wow and Flutter | 0.08% (WRMS) |
| Line Out | 0.5V (line) |
| Power Supply | 50/60 Hz |
| Track System | 4-track |
Essential safety, usage, and handling precautions for the MT1X, including AC adaptor, lightning, and cabinet care.
Details controls for mixer and recorder sections, including input selectors, faders, equalizers, and transport.
Guides on planning, setting levels, using dbx, stereo positioning, and monitoring during multitrack recording.
Steps for connecting equipment, preparing the recorder, and setting up for drum recording.
Steps for connecting, setting recorder, and configuring monitor/meter for bass guitar recording.
Explains how to re-record small segments on a track without disturbing others.
Instructions for cleaning tape heads, pinchroller, capstan, and head demagnetization.
To Next Page
