6
Chapter 2: Getting to Know the MT50
MT50 User’s Guide
F
ZERO STOP switch:
When set to ON, rewind stops automati-
cally at approximately 999 (the REW button remains depressed).
G
Tape counter and reset button:
The tape counter indicates
the tape position, making it easy to locate specific points in your
songs. The reset button resets the tape counter to 000.
H
Tape control buttons:
From left to right, their functions are to
record (REC); to play back the tape (PLAY); to rewind the tape
(REW); to stop the tape (STOP); and to pause either playback or
recording (PAUSE).
PLAY REW FF STOP PAUSEREC
PUSH OPEN
NOISE REDUCTION SYSTEM
To Next Page
Loading...
