Name: Yamaha MW10
Brand: Yamaha
Rating: 4 (1 reviews)

Questions and Answers:

Randy DunnJul 31, 2025

How to fix low recording levels on my Yamaha MW10?

J
Jessica FosterJul 31, 2025
If your recorded sound is too low when using the Yamaha Music Mixer, consider these adjustments: * Set the computer's output level to the maximum and mute the internal speaker. * For Windows, increase the 'Device volume' to 'High' in the 'Volume' tab of the 'Sounds and Audio Devices Properties' dialog window, and select 'No sound' in the 'Sound scheme'. * For Macintosh, set the volume slider to its maximum level in the Sound dialog window's Output tab, and minimize the Alert volume in the Sound Effect tab. * If you disconnected/reconnected the USB cable while Cubase AI 4 was running, check and raise the output level, as it may have been reset to its default.

Shawn MorrisonAug 7, 2025

What to do if there is no sound from my Yamaha MW10 Music Mixer?

R
Renee ZavalaAug 7, 2025
If you're not getting any sound from your Yamaha Music Mixer, here are a few things to check: * Ensure your speaker cables are properly connected and not shorted. * Verify that the volume controls on your audio sources, devices, software, and computer operating system are set to appropriate levels. * Make sure the sound output of your computer operating system is not muted. * Close any unused applications that might be interfering with the audio output. * Confirm that the sound output of your computer operating system is correctly assigned to the USB Audio CODEC in both the playback and recording settings. * For Windows, access this in Control Panel > Sounds and Audio Devices. For Macintosh, go to System Preferences > Sound.

Brand

Model

MW10

Yamaha MW10 Manual De Instrucciones

Other manuals for Yamaha MW10