Recording Your Performance
P-155 Owner’s Manual
ENGLISH
27
Re-recording a previously recorded song
If you are not satisfied with the recording, you can record it again. Using the following operation.
1. Select a voice or voices (and other settings) for
recording, if necessary.
Repeat step 1 on page 25 if you wish to change the previous settings.
2. Press the [REC] button again to re-engage Record
Ready mode.
The selected part’s indicator lights in red.
Follow the procedure from step 3 in “Recording a performance quickly” on
page 26 to re-record.
If you want to change the tempo,
reverb type, or effect type when
re-recording a part or when
recording to another part, do so
after engaging the Record Ready
mode.
You cannot re-record in the mid-
dle of a song.
NOTE
NOTE
To Next Page
Loading...
