Yamaha P-155 - Changing the Initial Settings (Data Recorded at the Beginning of a Song); [BRILLIANCE] Button

Recording Your Performance
P-155 Owner’s Manual
ENGLISH
30
Changing the Initial Settings (data recorded at the
beginning of a song)
The initial settings (data recorded at the beginning of a song) can be changed after the recording.
For example, after recording, you can change the voice to create a different ambience or adjust the
song tempo to your taste.
You can change the following initial settings.
Individual Parts
•Voice selection
• [REVERB] depth
• [EFFECT] depth
•Dual voices
• Split voices
• Damper/soft/expression pedal depth
Entire Song
•Tempo
• [REVERB] type (including OFF)
• [EFFECT] type (including OFF)
1. Change the settings via the panel controls.
For example, if you wish to change the recorded voice from [ELECTRIC PIANO
1]
to [ELECTRIC PIANO 2], press the [ELECTRIC PIANO 2] button.
2. Press the [REC] button to engage Record mode and
select a part to change the initial settings.
The indicator lights in red. (Data shared by two parts can be changed via either
part.)
CAUTION
Be careful not to press the [PLAY/PAUSE] button or a key on the keyboard after
step 2, either of which will start recording and erase all previously-recorded data
on the selected part.
3. Press the [REC] button to exit the Record mode.
2 3
2